Sunex Tools is one of the older players in the automotive accessories industry. They are known for their high-quality lifting gear, among other products.
In the following sections of this article, we will take a deep dive into the product #6602LP.
By the end of this article, you will be better acquainted with the technical specifications, warranty coverage, when to use this jack, and a lot more.
We will also answer some of the frequently asked questions about this product.
Read on to find out more!
- In Brief: Review of Sunex Tools 6602LP Service Jack
- Key Specifications of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
- Warranty / Repairs
- Customer Review Analysis of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
- Pros and Cons of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
- When and Who Should Use
- Recommended Accessories with Sunex 6602LP 2 Ton Low Rider Steel Service Jack
- Our Recommendation
Key Specifications of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
The Sunex 6602LP jack has the words ‘Low Rider’ in its name. This is indicative of the 2.75 inches of minimum height that this jack offers.
This ultra-low clearance is ideal for sports cars, exotic or modified models, as well as flat tires.
In contrast, the maximum height is 24 inches, which is versatile enough for SUVs and pick-ups. The jack employs the rapid rise in technology with the help of a dual pump piston design.
The manufacturers claim that the piston can reach the maximum height as quickly as 6 to 7 pumps.
The 18-inch long-throw is long enough to reach all factory-approved lifting points under the vehicle.
The low-profile design of this jack is consistent throughout the chassis. This feature helps in accessing the full reach beyond the pinch welds.
The jack features a rubber saddle and a foam handle bumper to prevent any damage to the vehicle while operating the jack.
The front of the jack is fitted with wide wheels, and the rear is equipped with swivel casters that move 360-degrees and offer full maneuverability.
The detailed technical specifications of this jack are tabulated below.
|Lift Capacity||2 tons (4,000 lbs.)|
|Minimum Lift Height||2 ¾ in|
|Maximum Lift Height||24 in|
|Lifting Range||21 ¼ in|
|Chassis Length||36 in|
|Saddle Diameter||4 in|
|Handle Length||45.25 in|
Warranty / Repairs
Sunex Tools provides a one-year warranty on the 6602LP 2-ton service jack.
This warranty serves to ensure that the product remains free of defects in workmanship or material for a year from the date of purchase.
In case of any defects, Sunex Tools will take ownership of repairing or replacing the product, free of cost, provided the usage conditions are fulfilled.
For more details, Sunex Tools can be reached at 800.833.7869.
Customer Review Analysis of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
Around 80% of the customers who have used the Sunex Tools 2-ton service jack have rated it 5/5 for its excellent performance.
Some of the parameters where this jack stood out were the value for money, sturdiness, and presentation.
Upon close examination by several customers, it is a given that careful thought and consideration has gone into the design of this jack.
The exterior paint finish is smooth and helpful in preventing corrosion and extending the usable life of the jack.
The heavy-duty steel construction reasonably assures one of a good lift. The handle requires minimal movement for raising the load to an adequate height.
According to the users themselves, whether it is a very low sports car or a large SUV, the perfect design of this jack will help you raise your vehicle quickly and give you adequate clearance for working.
Overall, the customers are pleased with the jack and would recommend it!
Pros and Cons of Sunex 6602LP 2 Ton Low Rider Steel Service Jack
The pros and cons of the Sunex 6602LP 2 Ton Low Rider Steel Service Jack are listed below.
- Robust, heavy-duty jack with solid steel construction
- Rated well for stability and sturdiness
- Excellent value for money
- Versatile in terms of compatibility with car models
- Good quality paint finish for anti-corrosion
- Easy to assemble and use
- Slightly heavy
When and Who Should Use
The 2-ton jack by Sunex Tools is a perfect addition to the personal garage or workshop.
The heavy-duty steel construction of this jack ensures that you can use it for lifting all kinds of vehicles with ease.
It is adequate for lifting your car to do a quick oil check, suspension check, transmission check, replace tires, etc.
Recommended Accessories with Sunex 6602LP 2 Ton Low Rider Steel Service Jack
Sunex Tools offers a wide range of shop equipment that can be paired with this service jack for optimizing your at-home automotive service experience.
We have listed a few of these accessories below.
Sunex Jack Stands Pair
Sunex Drawer Service Cart
A separate seal kit is not offered by the manufacturers. In case of any issues, you can refer to the instruction manual to find out the replacement part number. For this model, the part number for the hydraulic unit is RS6602LP27. Any other kind of help can be sought by contacting customer support.
No, a saddle pad is not included with the jack.
The rapid pump works until the jack comes in contact with the load. After that, the jack demonstrates decent speed for lifting the weight further.
The lowest height of the jack is around 2.75 inches.
The said height would be approximately 16 inches.
We would recommend this Sunex Tools 2-ton jack to everyone looking for an affordable and reliable lift.
The low-profile design of this jack helps you gain access under the lowest of ground clearances like in the case of modified cars, low-lying sports cars, or even flat tires.
The wide range of lift gives a 24-inch clearance, which is more than enough for you to operate under any vehicle with ease comfortably.
The jack is solidly built and offers premium-grade features at a very reasonable price.
The excellent features combined with many happy customer testimonies make us sure that this product is a good purchase for all automobile enthusiasts!